....etc

[:=Read Full Message Here=:]

detecting internal FAUlTS IN A TRANSFORMER WINDING
Presented by
RAKHI.M.S
EEE
College Of Engineering, Trivandrum
2007-11 batch



CONTENTS
Objectives
Introduction
Causes and Effects
Existing methods
Ratiometer method
Advantages and Limitations
Conclusion
Reference

OBJECTIVES

To detect the internal faults in a transformer winding
Detection of faults to take corrective measures to prevent interruption during operations
To improve the life expectancy of the trans ....etc

[:=Read Full Message Here=:]

PRODUCTS
Vasantha-Electronic Manufacturing Services
For the emerging potentials in Electronic manufacturing service vasantha is equipped with latest equipments and competent people who can make things happen. They are sourcing electronic components both from India and abroad. Solder the components using wave soldering/SMD soldering with high reliability. The PCBs are tested using various test jigs.
Vasantha advanced systems provides PCB Assemb ....etc

[:=Read Full Message Here=:]

ABSTRACT

This paper describes in detail, field experiments performed on a single-phase, distribution transformer to study the behavior of transformer terminal parameters during internal winding faults. A custom-built transformer provided with external taps was used for these tests. The taps were used to stage various internal winding faults in the transformer. Terminal values of voltages and currents were monitored and the results presented. A comparison of these results with simulation results is also presented


Presented By:
Palm ....etc

[:=Read Full Message Here=:]

sir, i need a ppt on manufacturing process of 500mw stator winding ....etc

[:=Read Full Message Here=:]

PRESENTED BY
SHAYISTHA.N


INTRODUCTION
* Use of air gap magnetic flux probes-proven effective in detection of generator winding shorted turns
* Improve quality of predictive maintenance decision when or if to perform rework
* Can pinpoint the no: & location(pole & coil) of shorted turns without having to take generator offline
EFFECTS OF SHORTED TURNS IN ROTOR WINDINGS
* If percentage of total turns shorted out is small, the generator may be able to run at rated load for years without further proble ....etc

[:=Read Full Message Here=:]

Application System Modeling Data Modeling through ER Model
Context Level Diagram
Data Flow Diagram
1. It is a graphical tool for designing systems ,input ,process and output.
2. It represents flow of data through system.
3. It shows the processes ,data stores ,sources & destination entities .
4. The transformation of data from input to output through process is described logically.
5. The top level diagram is called context diagram. It contains single process .It gives a broad overview of the system under ....etc

[:=Read Full Message Here=:]

Hi,
We want to start an robotic project for coil winding
We dont know the basic information about the robotic
Can you please explain about the robotic in details?
What is robotic?
How to learn the robitic principle?
How i will work in industry?
What can i do, to start the robotic project?
Type of robotic?
Notes for robotic for better understanding ?
How much budjet?
Thanks,
A.Gopanna
....etc

[:=Read Full Message Here=:]

Chapter 1
INTRODUCTION
Twelve to fifteen percentages of transformer failures are caused by winding deformations provoked by the high electrodynamics forces appearing during short circuits. These geometric vibrations lead to an increase of the winding vibration and, consequently, to an increase of the solid insulation mechanical fatigue. In this way, the isolation can be degraded and short circuit between turns will appear. On the other hand the change in the distance among the conductor implies a change in the serie ....etc

[:=Read Full Message Here=:]

PLEASE SEND ME THE SEMINAR PAGES ON HAZARDUS GAS DETECTION
IN MINING
....etc

[:=Read Full Message Here=:]