The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic discharge

ADVANTAGES

1. The pr ....etc

[:=Read Full Message Here=:]

Jet impingement heat transfer – Part I: Mean and root-mean-square heat transfer and velocity distributions
Abstract
Impinging jets provide a means of achieving high heat transfer coefficients both locally and on an area averaged basis. The currentwork forms the first stage of a two part investigation of heat transfer distributions from a heated flat surface subject to an impinging airjet for Reynolds numbers from 10,000 to 30,000 and non-dimensional surface to jet exit spacing, H/D, from 0.5 to 8. In the present paper,the rel ....etc

[:=Read Full Message Here=:]

In electron-beam machining (EBM), electrons are accelerated ..
In electron-beam machining (EBM), electrons are accelerated to a velocity nearly three-fourths that of light.

The process is performed in a vacuum chamber to reduce the scattering of electrons by gas molecules in the atmosphere.

The stream of electrons is directed against a precisely limited area of the workpiece;

on impact, the kinetic energy of the electrons is converted into thermal energy that melts and vaporizes the material to be removed, forming holes or cuts.
....etc

[:=Read Full Message Here=:]

The recent increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of newer machining techniques. Conventional machining or finishing methods are not readily applicable to the new materials like hastalloy, nitralloy, waspalloy, nimonics, carbides, ceramics etc.


Conventional machining processes when applied to these newer materials:
1. Are uneconomical,
2. Produce poor degree of surface finish and accuracy,
3. Produce some stress,
4. Highly insufficient.

Newer machin ....etc

[:=Read Full Message Here=:]

Manufacturing of the intricate machines has taken a new dimension with the introduction of the innovative process of chemical, electrical and mechanical methods. Electrochemical machining (ECM) is a groundbreaking technology, for the development of complicated machines. ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining


The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic dis ....etc

[:=Read Full Message Here=:]

pls send me detailed report and ppt abot this topic..pls send the details about this topic to take a seminaar for 30 min..
thanku. ....etc

[:=Read Full Message Here=:]

HELLO PLEASE I NEED TO GET THE INFORMATION OF THIS TOPIC SINCE CURRENT AM DOING THIS TYPE OF RESEARCH SO AM LACK OF RESOURCE COULD YOU MIND TO HELP ME ON THIS ISSUES ....etc

[:=Read Full Message Here=:]

DjtmtjapjmTjdgumjpxjgugumjpupvdmtpgmtpglngjmtpgajptnjgtwjpuwdjgpm ....etc

[:=Read Full Message Here=:]

i want d full report tehrtyuwretuetfrghrth thetrgfsrthu thdfhtrhb thdfghsrth thfgshrtyhxgfujhtr fhgbhtfrhxgbh tjdfgndty fhghet6yhb thfhtrb rtyhr ....etc

[:=Read Full Message Here=:]