1.Apex society means :
(i)Society having the whole of the state is its area of operation
(ii)Its members only other societies
(iii)Societies having the district is its area of operation
(iv)Central co-operative societies are the members Which one is correct ?
(A)(i) and (ii) (B)(i) and (iii) (C )(i) anti (iv) (D) (ii) and (iii)

2.As per co-operative societies act 1969, an application for registration of society shall be disposed of by the Registrar within :
(A)30 days(B)90 days(C ) 45 days(D) 120 days

3.Any member ....etc

[:=Read Full Message Here=:]

Integrated Implantable Stimulator without Off-Chip Blocking-Capacitors
Presented by:
Shiyad Ashraf
No. 61
College Of Engineering, Trivandrum
2007-11 batch

Contents
Introduction
Working of FES
Need of blocking capacitors
Disadvantages of using blocking capacitors
Methods of protection without off chip capacitors
Technique for avoiding off chip capacitors
Stimulator output stages utilizing blocking capacitors
Current generator circuits
Proposed current generator circuits
Proposed output stage
St ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining

Introduction
The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.

CLASSIFICATION
1. Contact initiated dischar ....etc

[:=Read Full Message Here=:]

Composite Rods as a Steel Substitute in Concrete Reinforcement



Introduction
The concrete construction industry is dealing with a very significant challenge regarding the
deterioration of structures. Nowadays a large number of bridges, buildings and other structural
elements require rehabilitation and repair and its maintenance have become an increasingly serious
problem. Once subjected to repeated loading and to aggressive environmental agents, concrete
....etc

[:=Read Full Message Here=:]

Hi am Manoj i want to know how to make agarbatti formula in pdf marathi. ....etc

[:=Read Full Message Here=:]

Economic Potential of Biological Substitute for Chemical Pesticides with Special Reference to IPM
1 INTRODUCTION
During the last three and half decades of the twentieth century, the productivity of the Indian agriculture increased dramatically. This remarkable increase resulted from an intensive use of high yielding seeds, fertilizers, pesticides, and water. The yield-augmenting technological change led to self-sufficiency in food production. Yet, the concerns of food security have not dim ....etc

[:=Read Full Message Here=:]

METALLURGICAL CHANGES IN STEELS DUE TO CRYOGENIC PROCESSING & ITS APPLICATIONS

Metallurgical changes in steels due to cryogenic
processing & its applications

Abstract:
Cryogenic processing is a supplementary process to conventional heat treatment process in steels. It is an inexpensive one time permanent treatment affecting the entire section of the component unlike coatings. Though the benefits have been reported widely, there are issues debated upon, in respect of the treatment parameters, extent of benefits ex ....etc

[:=Read Full Message Here=:]

Provide me with detailed content of ICSE 10 Maths project on Shares and Dividends urgently ....etc

[:=Read Full Message Here=:]

I need a power point presentation on the seminar topic titled Use Of Rubber as aggregate in concrete kindly provide me for my purpose. ....etc

[:=Read Full Message Here=:]

please send me replies as soon as possible and suggest me whether to take this as my project or not to make my project more effective.
thank you. ....etc

[:=Read Full Message Here=:]

Lean Manufacturing
Lean Manufacturing is a business initiative to reduce waste in manufactured products. The basic idea is to reduce the cost systematically, throughout the product and production process, by means of a series of engineering reviews.
The crucial insight is that most costs are assigned when a product is designed. Often an engineer will specify familiar, safe materials and processes rather than inexpensive, efficient ones. This reduces project risk, that is, the cost to the engineer, while increasing financi ....etc

[:=Read Full Message Here=:]

A TECHINACAL PAPER ON GREEN CONCRETE
New Technology In Concrete



CONTENTS

INTRODUCTION
GREEN LIGHTWEIGHT AGGREGATES
GREEN CEMENT WITH REDUCED ENV. IMPACT
PRODUCTION OF GREEN CONCRETE
SUITABILITY OF GREEN CONCRETE IN STRUCTURES
ADVANTAGES
APPLICATION OF GREEN CONCRETE
LIMITATIONS
SCOPE IN INDIA
CONCLUSION
REFERRANCES



INTRODUCTION
The con ....etc

[:=Read Full Message Here=:]

send me pdf file urgent send me dgsodvwjdjdowhwhwjdhfhwkqppsbdb s
shwiqodbs
ejdowpej ....etc

[:=Read Full Message Here=:]