all details of seminars ....etc

[:=Read Full Message Here=:]

AUTOMATION IN POWER FACTOR IMPROVEMENT USING PROGRAMMABLE INTERFACE CONTROLLER
INTRODUCING THE TOPIC
Definition of power factor.
Definition of power factor correction.
Leading and lagging power factors.
Importance of power factor to be unity.
OBJECTIVES OF THIS PROJECT
To counteract the undesirable effects of electric loads that create a power factor that is less than one.
To improve the stability and efficiency of transmission network.
Monitoring the power factor changes using PIC and LCD in real ....etc

[:=Read Full Message Here=:]

Voltage Stability Improvement using Static Var Compensator in Power Systems

Abstract This paper investigates the effects of Static Var Compensator (SVC) on voltage stability of a power system. The functional structure for SVC built with a Thyristor Controlled Reactor (TCR) and its model are described. The model is based on representing the controller as variable impedance that changes with the firing angle of the TCR. A Power System Computer Aided Design /Electromagnetic Transients including DC (PSCAD/EMTDC) is used to ....etc

[:=Read Full Message Here=:]

VETIVER SYSTEM FOR WATER QUALITY IMPROVEMENT



INTRODUCTION
Fresh water scarcity is predicted to become the greatest single threat to international stability, human health, global food supply .
According to the World Resources Institute, within 25 years, more than half of the world population will be suffering severe fresh water shortages.


Application of the Vetiver System for wastewater treatment is a new and innovative technology, which has the potential to meet the global water crisis.
It is a natural, ....etc

[:=Read Full Message Here=:]

IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
(THERMAL SCIENCES)
CONTENTS:
1. ABSTRACT
2. INTRODUCTION
3. PRINCIPLE OF HEAT RECOVERY FROM IC ENGINE
4. NECESSITY OF THERMAL STORAGE SYSTEM
5. LATENT HEAT THERMAL STORAGE SYSTEM
6. EXPERIMENTAL SETUP
7. RESULTS AND DISSCUSSIONS
8. PERFORMANCE CHARACTERISTICS STUDY
9. CONCLUSION
IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
ABSTRACT
The steady increased consumption of fuel and power over the years have ....etc

[:=Read Full Message Here=:]

IMPROVEMENT OF MECHANICAL PROPERTIES OF RIGID PAVEMENTS

INTRODUCTION
Transportation-basic infrastructure-development

Rigid and flexible

Basic neccesity-stable against loads

Rigid offers more strength “load

But change in temp. “warping up and warping down

To relieve stress-joint

Joint from the weaker plane and most of defects occur there

Increase the mechanical properties such as load carrying capacity and cracking resistance

Methods for improvement



Rigid Pav ....etc

[:=Read Full Message Here=:]

Shingo is well-known for his evolutionary work at Toyota and other Japanese companies, where he developed entire production systems focused on achieving zero defects in production. Behind poka-yoke is the notion that it is not acceptable to produce even a small amount of nonconforming product. To become a world-class competitor, an organization must adopt not only a philosophy but a practice of producing zero defects. Poka-yoke methods are the simple concepts for achieving this goal and are a key component of the continual improvement strategy ....etc

[:=Read Full Message Here=:]

Abstract:::
The demand for wireless mobile communications services is growing at an explosive rate, with the anticipation that communication to a mobile device anywhere on the globe at all times will be available in the near future.
An array of antennas mounted on vehicles, ships, aircraft, satellites, and base stations is expected to play an important role in fulfilling the increased demand of channel requirement for these services, as well as for the realization of the dream that a portable ....etc

[:=Read Full Message Here=:]

GROUND IMPROVEMENT TECHNIQUES FOR HIGHWAYS

INTRODUCTION
Transportation - needed for the development of the country.
The main mode of transportation is by road or highways.
In the process of road development, the alignment of road may have to be fixed through the soils which may not bear the traffic loads .
There are various techniques of ground improvement.

METHODS FOR GROUND IMPROVEMENT
Soil stabilization
Vertical drains
Stabilization trenches
Capillary cut-off
Soil nailing
Stone columns
Vib ....etc

[:=Read Full Message Here=:]

SYNOPSIS
Wire Electric Discharge Machining(WEDM) is one of the most important non-traditional machining process.Taguchi method is supplemented with various supportive techniques such as fuzzy logic, grey-relational analysis,two-phase parameter design, artificial neural network(ANN) and various combination methods to incorporate material removal rate(MRR) and surface roughness(SR)simultaneously .Particle Swarm Optimization(PSO)& Memetic Algorithm(MA) based optimization procedures have been developed to o ....etc

[:=Read Full Message Here=:]