ABSTRACT
Milking machine is the machine, which is used to milk cattle. It revolutionized the dairy farm industry, as it is an efficient and time saving means of milking machine. The development of the milking machine has been by trial and error from a very early time. Its development is still continuing. This paper deals with the explanation of the parts involved in the milking machine.
This also involves the working of the milking machine and the certain advancement involved in it.
INTRODUCTION
....etc

[:=Read Full Message Here=:]

a. Programmable active power factor improvement scheme for single phase switch mode boost rectifiers
b. SVPWM Techniques and Applications in HTS PMSM Machines Control
c. Space vector pulse width modulation of three level inverter extending operation into over modulation region
d. Impact of Reactive Power in Power Evacuation from Wind Turbines
e. Transient Fault Response of Grid Connected Wind Electric Generators
f. PMSM Speed Sensor less Direct Torque Control Based on EKF
g. Zbus Transmission Network Cost Allocation
h. Electromagn ....etc

[:=Read Full Message Here=:]

anti-lock braking system, or ABS is a safety system which prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking.A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to continue interacting tractively with the road surface as directed by driver steering inputs. While ABS offers improved vehicle control, and may decrease stopping distances on dry and especially slippery surfaces, it can also increase braking distance on loose sur ....etc

[:=Read Full Message Here=:]

ABSTRACT
Hydraulic systems provide a means of remotely controlling a wide range of components by transmitting a force through a confined fluid.
Because hydraulics can transmit high forces rapidly and accurately along lightweight pipes of any size, shape and length, they are the prime source of power in aircraft systems such as flying controls, flaps, retractable undercarriages and wheel brakes.
Modern aircrafts include many different types of subsystems. These subsystems are very closely interlinked t ....etc

[:=Read Full Message Here=:]

NO-MOVING-PART
HYBRID-SYNTHETIC JET ACTUATOR
Article Outline
1. Introduction
2. The actuator model
2.1. General
2.2. Amplifier
2.3. Feedback loop
3. Results
3.1. Oscillation frequency
3.2. Modified Strouhal number
3.3. Constant Strouhal number regime
3.4. Constant propagation velocity regime
4. Conclusions
Acknowledgements
References
1. Introduction

Actuators based on the synthetic jet idea are currently becoming of increasing importance for a number of applications, especially involving control of flo ....etc

[:=Read Full Message Here=:]

Generator Protection Schemes
The following are the main projects related with protection schemes adopted generator. ,, briefs about each has been depicted below
1. Generator Differential Protection
2. Generator & Transformer Differential Protection
3. Loss of Field or Loss of Excitation Protection
4. Negative Sequence or Current Unbalance Protection
5. Over Fluxing or Over Excitation Protection
6. Over Current Protection
7. Stator Earth Fault Protection
8. Rotor Earth Fault Protection (64R)
9. Restricted Earth Fault Protection ....etc

[:=Read Full Message Here=:]

Abstract:
Anti-lock braking systems (ABS) take a lot of the challenge out of this sometimes nerve-wracking event. In fact, on slippery surfaces, even professional drivers can't stop as quickly without ABS as an average driver can with ABS.anti-lock braking system, or ABS is a safety system which prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking.A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to cont ....etc

[:=Read Full Message Here=:]

ABSTRACT
Sensotronic Brake Control (SBC„¢) works electronically, and thus faster
and more precisely, than a conventional hydraulic braking system. As
soon as you press the brake pedal and the sensors identify the driving
situation in hand, the computer makes an exact calculation of the brake
force necessary and distributes it between the wheels as required. This
allows SBC„¢ to critically reduce stopping distances. SBC„¢ ....etc

[:=Read Full Message Here=:]

i need Matlab / Simulink Implementation for Reducing the Motor Derating and Torque Pulsation of Induction Motor using Matrix Converter project report please send me documentation ................. ....etc

[:=Read Full Message Here=:]

a. Development of a Slip and Slide Simulator for Electric Locomotive Based on Inverter Controlled Induction Motor
b. Second Order Sliding Mode for Traction Control in Ride-by-Wire Sport Motorcycles
c. Indirect Matrix Converter Based on Investigations of Field-oriented control for Induction Motor
d. SVPWM Techniques and Applications in HTS PMSM Machines Control
e. A 24-pulse AC-DC converter employing a pulse doubling technique for vector controlled induction motor drives
f. Prediction-based ripple reduction in Direct Torque Control of ....etc

[:=Read Full Message Here=:]

anti-lock braking system, or ABS is a safety system which prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking.A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to continue interacting tractively with the road surface as directed by driver steering inputs. While ABS offers improved vehicle control, and may decrease stopping distances on dry and especially slippery surfaces, it can also increase braking distance on loose sur ....etc

[:=Read Full Message Here=:]