RESINSThermosetting &Thermoplastic resins
Introduction
Resins
The primary functions of the resin are to transfer stress between the reinforcing fibers, act as a glue to hold the fibers together, and protect the fibers from mechanical and environmental damage.
Resins are divided into two major groups known as thermoset and thermoplastic.
Thermoplastic Resins
Process
The curing process transforms the resin into a plastic or rubber by a cross-linking process. Energy and/or catalysts are added that ....etc

[:=Read Full Message Here=:]

By,
PRADEEP.T.P

Introduction

Copper , Aluminium and Lead-common journal bearing materials.
Bronze and Brass- Copper based alloys.
Zamacs - Zinc based alloys.
Duralumines - Aluminium based alloys.
White metals- Tin lead based alloys.
Present study- Tribological and mechanical properties of these journal bearings materials.

Tribology

Science and technology of interacting surfaces in relative motion and of related sub and practices.
Deals with ....etc

[:=Read Full Message Here=:]

please send me replies as soon as possible and suggest me whether to take this as my project or not to make my project more effective.
thank you. ....etc

[:=Read Full Message Here=:]

Abstract
This paper focuses on the experimental investigation carried out on high strength concrete reinforced with hybrid fibres (combination
of hooked steel and a non-metallic fibre) up to a volume fraction of 0.5%. The mechanical properties, namely, compressive strength, split
tensile strength, flexural strength and flexural toughness were studied for concrete prepared using different hybrid fibre combinations –
steel–polypropylene, steel–polyester and steel–glass. The flexural properties were studied using four point ben ....etc

[:=Read Full Message Here=:]

Abstract :

The case study project is significant since mild steel is used in structure, case hardening, gears, free cutting steels, shafting, forging etc. Mild steel plates were tested for mechanical properties like hardness, tensile strength, yield point etc. Later on the plates were joined by submerged arc welding and the mechanical properties were estimated again. Also weld ability, harden ability, tensile test etc. were conducted for the same result. ....etc

[:=Read Full Message Here=:]

pl send to my mail id

financial aspects of rhino resins pvt ltd ....etc

[:=Read Full Message Here=:]

I need ppt and seminar report on mechanical properties of Sand replacement by copper slag plzzz help me sir... ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
ISHATPREET KAUR


MECHANICAL PROPERTIES OF CONCRETE INCORPORATING USED
FOUNDRY SAND
ABSTRACT
Metal foundries use large amounts of the metal casting process. Foundries successfully
recycle and reuse the sand many times in a foundry and the remaining sand that is termed
as foundry sand is removed from foundry. This study presents the information about the
civil engineering applications of foundry sand, which is technically sound and is
environmentally safe. Use of foundry sand in various ....etc

[:=Read Full Message Here=:]

peek and its application
peek
peek
peek
peek
peek
peek
peek
peek and its application
peek
peek
peek
peek
peek
peek
peek
peek
peek ....etc

[:=Read Full Message Here=:]

IMPROVEMENT OF MECHANICAL PROPERTIES OF RIGID PAVEMENTS

INTRODUCTION
Transportation-basic infrastructure-development

Rigid and flexible

Basic neccesity-stable against loads

Rigid offers more strength “load

But change in temp. “warping up and warping down

To relieve stress-joint

Joint from the weaker plane and most of defects occur there

Increase the mechanical properties such as load carrying capacity and cracking resistance

Methods for improvement



Rigid Pav ....etc

[:=Read Full Message Here=:]