Give some new project ideas about driver assistance in automotive electronics ....etc

[:=Read Full Message Here=:]

The sole motive of an AUTOSAR is the replacement of the proprietary standards of the software system functions, into an open standard. This helps in building a plug-and-play atmosphere where the software modules can go hand in hand with the electronic architecture at the same time. This creates an open standard for automotive E/E architecture. This in turn will help in having a standardized tool chain that can become the fundamental building block for management functions for both the future applications and standard software modules. ....etc

[:=Read Full Message Here=:]

i need complete report on automotive electronics ....etc

[:=Read Full Message Here=:]

Abstract
Organic electronics, (plastic electronics or polymer electronics), deals with conductive polymers, plastics, or small molecules. It is called 'organic' electronics because the polymers and small molecules are carbon-based, like the molecules of living things. This is as opposed to traditional electronics (or metal electronics) which relies on inorganic conductors such as copper or silicon. Polymer electronics are laminar electronics
applications
negative differential resistance(switches)
melanins. Historically, melanin is anoth ....etc

[:=Read Full Message Here=:]

HISTORY
The commonly used key systems for locking/unlocking of car doors, turning on/turning off of engine and security systems has been enhanced by the new technology developed under Automotive electronics. The technology is termed as SMART KEY SYSTEM. The rapid growth of new technologies began in early 20th century. Mercedes Benz was the first automotive manufacturing company to implement the SMART KEY SYSTEM technology back in the 1990’s. Locking keys inside a vehicle was all too common experience for many driv ....etc

[:=Read Full Message Here=:]

1.CAN based Industrial Automation
2.CAN based CAR Security System
3.Automatic Vehicle Speed Management System
4.CAN based Speedometer Implementation
5.Automatic Vehicle Parking System.
6.Implementation of Airbag System through CAN ....etc

[:=Read Full Message Here=:]

FPGA BASED RADAR SIGNAL PROCESSING FOR AUTOMOTIVE DRIVER ASSISTANCE SYSTEM
Submitted by
Bibin Mohanan
S7 ECE
Roll no. 21
CET
2007-11 batch




OUTLINE
Introduction
What is Radar?
Principle of operation
Radar limiting factors
Radar signal processing
Applications of Radar signal processing
Driver Assistance System
Design of FPGA based Radar signal processing system.
Conclusion
References.
Introduction
Safety and comfort applications are addres ....etc

[:=Read Full Message Here=:]

An embedded system is a special-purpose system in which the computer is completely encapsulated by the device it controls. Unlike a general-purpose computer, such as a personal computer, an embedded system performs one or a few pre-defined tasks, usually with very specific requirements. Since the system is dedicated to specific tasks, design engineers can optimize it, reducing the size and cost of the product.

http://ziddudownload/5571379/Automotivebasedmanag.rar.html ....etc

[:=Read Full Message Here=:]

1. Implementation of Air Bag System in a vehicle
2. Speedometer implementation using CAN
3. Monitoring of Engine Parameters
4. Automatic vehicle speed management system ....etc

[:=Read Full Message Here=:]

ABSTRACT
An automotive propulsion concept is presented which
utilizes liquid nitrogen as the working fluid for an open
Rankine cycle. Ambient heat exchangers are used to power
an engine that is configured to maximize heat transfer during
the expansion stroke. If sufficient heat input during the
expansion process can be realized then this cryogenic
propulsive system would provide greater automotive ranges
and lower operating costs than those of electric vehicles
currently being considered for mass production.
The
feasibility of meeti ....etc

[:=Read Full Message Here=:]