Electro-Hydraulic Brake (EHB)

ABSTRACT

Brake performance can be divided into two distinct classes:

1) Base brake performance
2) Controlled brake performance.

A base brake event can be described as a normal or typical stop in which the driver maintains the vehicle in its intended direction at a controlled deceleration level that does not closely approach wheel lock. All other braking events where additional intervention may be necessary, such as wheel brake pressure control to prevent lo ....etc

[:=Read Full Message Here=:]

hi this is neelesh, final yr engg student from vardhaman college of engg. I need a brief information about automation of hydraulic jack which may be used in a four wheeler
i've already made the design which s ready with me but the thing is i need to get it done within certain limits with exact calculation of how much load s lifted nd torque needed etc etc
if u hav any idea could u plz mail it to the below givem mail address
email-id- [email protected]

with regards
neelesh ....etc

[:=Read Full Message Here=:]

INTRODUCTION
This project automatic electro-hydraulic jack for light vehicle garages has been developed to the needs of small and medium automobile garages.
In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors.
In order to avoid all such disadvantages, this automatic electro-hydraulic Jack has been designed in such a way that it can be used to lift the vehicle very smoothly without any impact force. The operation is made be simple that even any person c ....etc

[:=Read Full Message Here=:]

AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER
SYNOPSIS
This project work titled “AUTOMATIC ELECTRO-HYDRAULIC JACK FOR LIGHT VEHICLE” has been conceived having studied the difficulty in lifting the any type of light vehicles.
Our survey in the regard in several automobile garages, revealed the facts that mostly some difficult methods were adopted in lifting the vehicles for reconditioning.
Now the project has mainly concentrated on this difficulty, and hence a suitable electronic control unit has been desig ....etc

[:=Read Full Message Here=:]

Good Morning. I am a professor in an Engineering college and i need your help for the design of a hydraulic jack. I request you to send me the required data.

Thank You,
Prof. Sushant s. Pande ....etc

[:=Read Full Message Here=:]

MAIN PURPOSE:


The hydraulic jack is a device, which is used to lift heavy loads by applying a lot of small force. It is based on the PASCAL LAW, which states that the pressure intensity is equally transmitted in all directions through a mass of liquid in res
http://1.bp.blogspot.com/-ezeV9hTrYrs/VM-khEN268I/AAAAAAAAAhk/R6K1aFJ0Ba8/s1600/54.jpg

ITS PRINCIPLE OF MAIN OPERATION:

The operating principle of a hydraulic jack can be explained with the aid of the figure, some different parts are considered as a p ....etc

[:=Read Full Message Here=:]

jhkldsfkljkldsjfkljdskljfklsdj jklfjkljasdfj jklwejfkldsfjkljsfklj jkldsjkljdsdkljg jfkljsd dsjkfhsg dshghsdhg dhsghsv hs hgjhsv hkjhg shg sdhjkg hs ghsd g hskg hjshgkjhasgk g hgs ghskgj sg hkg hgkshg kksg k sg sg hkj gkjgh ksdhgkjhs gk hgk ghgf gkdh kgkj fgj dgj gjd fkg hjg hg ....etc

[:=Read Full Message Here=:]

TO DESIGN & FABRICATE A SIX SLOT GENEVA WHEEL MECHANISM
INTRODUCTION
The Geneva mechanism is a timing device. It is used in many counting instruments and in other applications where an intermittent rotary motion is required. Essentially, the Geneva mechanism consists of a rotating disk with a pin and another rotating disk with slots (usually six) into which the pin slides. The Geneva mechanism was originally invented by a watch maker. The watch maker only put a limited number of slots in one of the rotating disks ....etc

[:=Read Full Message Here=:]

ABSTRACT


The Hydro Electric Power Plant consists of various equipments. Among these the governor is considered as backbone of the hydro electric power plant. The basic function of the governor is to maintain the constant turbine speed under all working conditions. The governor is highly helpful while considering the normal and grid failure conditions.



The present work is carried out at Srisailam Hydro Electric Power Plant, which is located on the Krishna River, in Kurnool District. The Srisailam Hydro Electric Power Plan ....etc

[:=Read Full Message Here=:]

Am a polytechnic student,agric engineering ND2. I want to fabricate maize de-husker for my project pls help me out ....etc

[:=Read Full Message Here=:]