CYLINDER MANAGEMENT
Abstract

Active fuel management is one of the important concerns in the present day automobile industry. Cylinder management is a variable displacement technique adopted to increase the fuel efficiency of the engine. The technique aims at having more efficient power trains for cars. Depending upon the power requirements of the car the cylinders of the engine are made operational. In cases where the power requirement is less, as in the case of heavy traffic, a few of the automobile IC engine cylinder ....etc

[:=Read Full Message Here=:]

where can i get animated videos of cylinder deactivation technology?
what exactly synopsis should i give ?
I need more material regarding cylinder deactivation also some attractive photos or images
PLEASE HELP ....etc

[:=Read Full Message Here=:]

Please provide the full report of cylinder deactivation ....etc

[:=Read Full Message Here=:]

Author / Author: Anthony Deku, Subramanya Kompella Anthony Deku, Subramanya Kompella


Abstract:
The problem of possible pitting and cavitation in internal combustion engines is
receiving Considerable attention. Both theoretical and simulation simulation studies
are carried out in order to understand the noise and vibration sources, using a force
equation. Both theoretical simulation and simulation studies are carried out in order to
understand the noise and vibration sources, using a force equation.For this work ....etc

[:=Read Full Message Here=:]

Presented by:
P.UDAY KIRAN
P.MAHESH BABU
K.CHALAMAIAH
S.V.SRINIVASA REDDY
B.MADHU BABU


ABSTRACT
Engine is one of the most important and costliest part/system of a vehicle, which acts like a heart of the human being, so, we have to keep it in always good condition.
It consumes around 55% of operating cost of the vehicle, due to which we have to concentrate more on ....etc

[:=Read Full Message Here=:]

Automotive thermoelectric generator
An automotive thermoelectric generator (ATEG) is a device that utilizes the Seebeck effect in order to recover lost heat from an internal combustion engine powered vehicle, and generate electricity with it. A typical ATEG consists of four main elements: A hot-side heat exchanger, a cold-side heat exchanger, thermoelectric materials, and compression assembly system. ATEGs can be classified according to their hot-side heat exchanger to exhaust-based ATEGs and coolant-based ATEGs. The ....etc

[:=Read Full Message Here=:]

Can you give me related studies about electronic controlled stopper cylinder ....etc

[:=Read Full Message Here=:]

Dear Sirs

I want to know about some tests on composite LPG cylinders such as hydrostatic test, impact test, fire test, falling test and so on. please let me know about them.

thanks in advance
Mirzai ....etc

[:=Read Full Message Here=:]

Compressed Gas Cylinder Safety
INTRODUCTION
Compressed Gas Cylinders usually contain gases stored at very high pressure (usually around 2200 psi) and are connected with a hose and a regulator when in use.
Many industrial and laboratory operations require the use of compressed gases for a variety of different operations.
INTRODUCTION
Compressed gases present a unique hazard. Depending on the particular gas, there is a potential for simultaneous exposure to both mechanical and chemical hazards. Gases may be ....etc

[:=Read Full Message Here=:]

CYLINDER DEACTIVATION
1. INTRODUCTION
With alternatives to the petrol engine being announced ever so often you could be forgiven for thinking that the old favorite the petrol engine is on its last legs but nothing could be further from the truth and possibilities for developing the petrol engines are endless. One of the most crucial jobs on the agenda is to find ways of reducing fuel consumption, cutting emissions of the green house gas CO2 and also the toxic emissions which threaten air quality. One such fast emerging t ....etc

[:=Read Full Message Here=:]