Carrier Based PWM Algorithm for
Indirect Matrix Converters

Bingsen Wang Giri Venkataramanan
Department of Electrical and Computer Engineering
University of Wisconsin-Madison
1415 Engineering Drive
Madison, WI 53706 USA


Abstract— In this paper, the indirect matrix converter is
systematically studied with the single-pole-multiple-pole
representation. A carrier based PWM algorithm is developed
in two steps. First, the continuous modulation functions for all
the throws are derived based on the desired sinusoid ....etc

[:=Read Full Message Here=:]

Hi
can any one help me regarding my topic named as (Single phase to 3 phase converter for driving 3 phase induction motor)
I need a complete(brief) study report about this topic.
If anyone can help me, plz do help me
I'll be very thankful.
....etc

[:=Read Full Message Here=:]

Abstract –
The matrix converter is superior to the P W inverter drives because of its regeneration ability and sinusoidal input current. Therefore, it meets the stringent energy-efficiency and power quality requirements of the new century. This paper describes the basic operating principles and control method of the matrix converted; and reports the detailed experimental operating characteristics of an I1 kVA matrix converter drive over its full operating range. Through the experimental operating characteristics ....etc

[:=Read Full Message Here=:]

Field Orientated Control of a Multi-Level PWM Inverter Fed Induction Motorr
abstract
This thesis presents the simulation of a Field Orientated Control of a Multi level PWM Inverter fed induction motor system and its implementation in terms of programming and code in a real time operating system. Field Orientated Control allows precise controllability and excellent transient behaviour when used to control an induction motor by manipulating the angle and amplitude of the torque and speed producing curren ....etc

[:=Read Full Message Here=:]

ABSTRACT

The rectifier and inverter are used in vector control of induction motor. The most shortcomings are that exist a big capacitor and energy pass only from power sources to load. This paper details a novel matrix converter-indirect matrix converter. It is used in vector controlling research of induction motor and displaced for conventional inverter to supply power for induction motor. Because switches are bidirectional in the rectifier, it can realize bidirectional pass of the energy and decrease pollution of harmonic wave. Meanwhile ....etc

[:=Read Full Message Here=:]

Sensorless Indirect Stator Field Orientation Speed Control for Single-Phase Induction Motor Drive
Abstract
The industrial requirements for the control of an inductionmachine without a mechanical sensor continue to be ofinterest, as evidenced by the most recent publications. The focusis on improvements of control without a mechanical sensor. A newmethod for the implementation of a sensorless indirect stator-fluxorientedcontrol (ISFOC) of a single-phase induction motor (SPIM)drive is proposed in this paper. The proposed method of rotor ....etc

[:=Read Full Message Here=:]

it is essential for me for major project
I require ppt for indirect vector control of induction motor ....etc

[:=Read Full Message Here=:]

hii, i want more information about the Optimal Intelligent Controller for Matrix Converter Induction Motor Drive System
thank you ....etc

[:=Read Full Message Here=:]

ABSTRACT
Indirect field orientation (IFO) induction machine drives are increasingly employed in industrial drivesystems, but the drive performance is often degrades. Motor works on best performance at certain voltageand frequency for certain loads. In this paper artificial neural network is used to predict the operatingvoltage and frequency when the load torque and speed going changed so motor efficiency is increased.Simulation and experimental results are shown to validate the scheme.
I. INTRODUCTION
Because of their easy imp ....etc

[:=Read Full Message Here=:]

DIRECT TORQUE CONTROL FOR MATRIX CONVERTER-FED THREE PHASE INDUCTION MOTOR WITH HYBRID PSO
ABSTRACT
Direct Torque Control (DTC) for Induction Motors using Matrix Converters is a high performance motor
control scheme with fast torque and flux responses. This paper presents a new control scheme based on
hybrid particle swarm optimization (HPSO). The main advantages of the matrix converter are combines
with those of the DTC technique, generating the required voltage vectors under 0.9 input power factor
operations. The results ....etc

[:=Read Full Message Here=:]