A moving train contains energy, known as kinetic energy, which needs to be removed from the train in order to cause it to stop. The simplest way of doing this is to convert the energy into heat.

The conversion is usually done by applying a contact material to the rotating wheels or to discs attached to the axles. The material creates friction and converts the kinetic energy into heat. The wheels slow down and eventually the train stops. The material used for braking is normally in the form of a block or pad

The vast majority of the ....etc

[:=Read Full Message Here=:]

anti-lock braking system, or ABS is a safety system which prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking.A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to continue interacting tractively with the road surface as directed by driver steering inputs. While ABS offers improved vehicle control, and may decrease stopping distances on dry and especially slippery surfaces, it can also increase braking distance on loose sur ....etc

[:=Read Full Message Here=:]

m doing project on fabrication of dual brake single lever system for two wheeler with parking braking.so please send me material on this project.i want to know working,component using for this etc.i want to get some idea on this project.
i will be very grateful to you.

thanks ....etc

[:=Read Full Message Here=:]

hello.......can any one please tell me that how does the hydraulic RBS system works?
i'm a final year student so i have to make a project on the same topic but i'm not getting the appropriate data for the same.so if anybody has any material regarding the HYDRAULIC REGENERATIVE BRAKING SYSTEM then please upload it.i needed that badly....... ....etc

[:=Read Full Message Here=:]

MAIN PURPOSE:


The hydraulic jack is a device, which is used to lift heavy loads by applying a lot of small force. It is based on the PASCAL LAW, which states that the pressure intensity is equally transmitted in all directions through a mass of liquid in res
http://1.bp.blogspot.com/-ezeV9hTrYrs/VM-khEN268I/AAAAAAAAAhk/R6K1aFJ0Ba8/s1600/54.jpg

ITS PRINCIPLE OF MAIN OPERATION:

The operating principle of a hydraulic jack can be explained with the aid of the figure, some different parts are considered as a p ....etc

[:=Read Full Message Here=:]

ABSTRACT
Mechatronics is a hybrid technological field which evolved from the combination of mechanical, electronics & Software engineering. Automobiles need high degree of safety to protect the occupants and their property. Bearing this in senses we come up with a new concept of Electric pulse Magnetic Braking (E.P.M.Braking).
When the driver applies force on the brake pedal the magnitude is sensed by the pressure transducer which in turn sends the actuating signals to microprocessor. This intelligent devi ....etc

[:=Read Full Message Here=:]

I want conclusion for my seminar on topic hydraulic brake system. ....etc

[:=Read Full Message Here=:]

Abstract:
ABS system includes wheel-speed sensors, a hydraulic control unit, and an electronic control unit. When apply the brake pedal, the electronic control unit monitors and compares the signals from the wheel-speed sensors. If the electronic control unit senses rapid deceleration (impending lock-up) at a given wheel, the electronic control unit commands the hydraulic control unit to reduce hydraulic pressure to that wheel. ABS system preventing a skid and allowing the wheel to continue interacting tractively with the road surface as dire ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

HYDRAULIC BRAKING SYSTEM



Introduction

Brake is the device used for slowing, stopping and controlling the vehicle. In braking operation the kinetic energy of vehicle is converted into heat, which dissipated to atmosphere.

Main Functions of Brake System

To stop the vehicle safely in shortest possible distance in case of emergency.
To control the vehicle when it is descending along the hills.
To keep the vehicle in desired position after bringing it in complete rest when there is no driver.
....etc

[:=Read Full Message Here=:]