hello sir ,
I m final year student of E & TC.I need the report of Microcontroller Based General Purpose PLC with USB Interface project.




Prajakta Kharote. ....etc

[:=Read Full Message Here=:]

ABSTRACT

The objective of this project is to design electronic energy meter. Presently With the help of electromagnetic energy meter the amount of the electricity usage can be calculated. This project helps to design electronic energy meter. To identify the amount of the power used by the house can be calculated using I sense and V sense. V sense contains the Potential transformer rectifier unit and the Zener diode. Zener diode is used for the function of maintain the voltage level up to 5V. I sense contains the current transformer re ....etc

[:=Read Full Message Here=:]

Design and analysis of spindle with Spm (special purpose machine).

ABSTRACT

The present work is carried out on TWO STATION TWO SPINDLE CAM BORE ROUGHING /FINISHING SPM.It is a SPECIAL PURPOSE MACHINE exclusively used for HEROHONDA in which it is used for fine boring to reduce the oil consumption of the two wheeler.
The objective of my project is to generate a parametric assembly drawing of spindle assembly using Pro-E, and analysis of spindle assembly using ANSYS.
F ....etc

[:=Read Full Message Here=:]

Presented by:
Raisa cabacaba
Jessie donasco
Reginard fajanoy
edmarlyn maravillosa


Knowledge Management and Special Purpose Business Information System
 KNOWLEDGE MANAGEMENT
 KM Strategy in organizations
“KM is a concept in which an enterprise gathers, organizes, shares, analyzes the knowledge of individuals and groups across the organization in way that directly affect performance”
A discipline that helps spread knowledge of individuals or groups across organizations in ways that directly a ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

Abstract

Project Name: Multi-Purpose Java Instant Messaging Tool

Java Instant Messaging Tool is designed for portability and extensibility. It is a fully featured, stand-alone, skin able chat client that supports AIM, ICQ, MSN, Yahoo Messenger, and IRC.

Key Features:

It provides capabilities not possible with original network clients, while supporting standard features such as audio chat, file transfers, group chats, chat rooms, buddy icons, multiple simultaneous connections to the same network, server-side cont ....etc

[:=Read Full Message Here=:]

ABSTRACT:
Day by day the interest on special machines increases. Because these machines serves for several applications. For instance, the nano generator could drive biological sensors by making use of wind energy or water flow, eliminating the need for external batteries. This not only reduces the device cost but also at the same time reduces the entire equipment size.
Integrated starter generator which is used in electric vehicles acts as a bidirectional energy converter as a motor when powered by the battery or a generator when driven b ....etc

[:=Read Full Message Here=:]

Standard Single Purpose Processors: Peripherals
Introduction
• Single-purpose processors
– Performs specific computation task
– Custom single-purpose processors
• Designed by us for a unique task
– Standard single-purpose processors
• “Off-the-shelf” -- pre-designed for a common task
• a.k.a., peripherals
• serial transmission
• analog/digital conversions
Timers, counters, watchdog timers
• Timer: measures time intervals
– To generate timed output events
• e.g., hold t ....etc

[:=Read Full Message Here=:]

Large amounts of renewable energy resources is a step necessary to achieve a clean and secure electric power industry. The storage in future grids is receiving the attention from the system designers, grid operations and regulators.

need for storage:
The meeting of the North American Electric distribution association suggested the use of storage from large-scale bulk-storage systems to small units at
or near the point of load. The plug-in hybrid electric vehicles will also drive the development of the grid.

Spectrum of E ....etc

[:=Read Full Message Here=:]

85/2014
Maximum : 100 marks
Time : 1 hour and 15 minutes

1. V belt run in-------------------degree v-groove.
(A)60°
(B)55°
(C )29°
(D)40°

2. The -----------------is the operation of forming the edges of a component into roll by bending the sheet metal in order to strengthen the edges and to provide smoothness to its surface :
(A)Bending
(B)Curling
(C )Lancing
(D)Forming

The back gear system of a lathe is used to :
(A)Reduce the spindle speed
(B)Increase the spindle speed
(C )Only used in thread cut ....etc

[:=Read Full Message Here=:]