CHAIN DRIVES IN LOW TORQUE DRIVES AND REDUCING PULSATIONS
INTRODUCTION TO DRIVES

Mechanical components used for power transmission.It may be belt, chain or gear depending on engine design parameters like - Distance between crankshaft and camshaft, engine maximum speed, engine-torque and engine construction cost.- Power transmission is done from one shaft to another shaft which may or may not rotate at same spe ....etc

[:=Read Full Message Here=:]

I need some ppts regarding special electrical drives like about SRM, BLDC, Stepper motors, Synchronous reluctance motors.. Pls i need it quickly ....etc

[:=Read Full Message Here=:]

(1)Power modulator:
Resistance controllers
Eddy current drive
MG set
The function of the power modulator is to change the electric energy of the source as per load torque speed characteristics.
(2)Control circuit:
The function of control circuit is to control - the speed, starting characteristics and braking characteristics
(3)Motor:
The motor can be ac or dc, as per the application of use of the drive.
(4)Sensing unit:
....etc

[:=Read Full Message Here=:]

DIRECT DIGITAL RF MODULATOR:A MULTI-FUNCTION ARCHITECTURE FOR A SYSTEM-INDEPENDENT RADIO TRANSMITTER
Sarath Kumar P.K
Roll No:57
S7 E&C



CONTENTS
Introduction
Communication system
RF Systems
Direct conversion modulator
DDRF Modulator
Conclusion
References

INTRODUCTION
Increase in number of radio systems in portable devices
High signal bandwidth and narrow channel bandwidth
Need for low cost,low power and low complexity transmitter architecture
Need for ad ....etc

[:=Read Full Message Here=:]

INTRODUCTION

The proliferation of wireless products over past few years has been rapidly increasing. New wireless standards such as GPRS and HSCSD have brought new challenges to wireless transceiver design. One pivotal component of transceiver is frequency synthesizer.

Two major requirements in mobile applications are efficient utilization of frequency spectrum by narrowing the channel spacing and fast switching for high data rates. This can be achieved by using fractional- N PLL architecture. They are capable of synthesizing frequencies ....etc

[:=Read Full Message Here=:]

Simona Coman1, V. Comnac1, Member IEEE, Cr. Boldisor1, D.C. Dumitrache2
1Automation Department, “Transilvania” University of Brasov, 5 M.Viteazu Str.,
500174 Brasov, Romania, phone/fax: +40 0268 418836,
2 Department of Automatic Control, Technical University of Cluj-Napoca,
26-28 Gh. Baritiu Str., 400027 Cluj-Napoca, Romania



Abstract –

The distributed control systems with communication
networks are used in many industrial applications. These systems
are often re ....etc

[:=Read Full Message Here=:]

Electrical Drives of Machine Tools
Introduction
The arrangement of the motor nearby the operative member and also the use of variable-speed electric motors make it possible to simplify mechanical transmissions as well as the construction of the machine.
This helps to improve machine-tool design and considerably reduce the physical force required to handle the machine.
Introduction
One or more electric motors driving the operative members of the machine tool make up the machine's essential components.
T ....etc

[:=Read Full Message Here=:]

difference between chopper fed drives and converter fed drives pdf ....etc

[:=Read Full Message Here=:]

Introduction

The proliferation of wireless products over past few years has been rapidly increasing. New wireless standards such as GPRS and HSCSD have brought new challenges to wireless transceiver design. One pivotal component of transceiver is frequency synthesizer.

Two major requirements in mobile applications are efficient utilization of frequency spectrum by narrowing the channel spacing and fast switching for high data rates. This can be achieved by using fractional- N PLL architecture. They are capable of synthesizing frequencies ....etc

[:=Read Full Message Here=:]

i wANT DOWNLOad this book Power Converters And AC Electrical Drives plz help me i neet it ....etc

[:=Read Full Message Here=:]