Abstract
Different materials are used in building different
parts of the aircraft with respected to their
functions
– fuselages and engines materials
– strategic considerations lead to goals,
requirements and limitations
– Safety first, followed by performance, cost of
material and processing net shapes, including
recycling ....etc

[:=Read Full Message Here=:]

Photocatalysis is an advanced oxidation process and receiving widespread attention in recent times for completely mineralizing organic contaminants in water and air. As a first part of our study, the parameters (dissolved oxygen, catalyst concentration, and light intensity) influencing intrinsic kinetics of phenol degradation is investigated using immersion-well batch reactor with 6 and 125 W UV-A lamps. At high light intensity, dissolved oxygen concentration in the slurry decides the optimum catalyst loading. At low light intensity comparable ....etc

[:=Read Full Message Here=:]

Presented by:ARUSH TIWARI



Customers PROFILE :
 DOMESTIC CUSTOMERS..
Indian Air Force
Indian Navy
Indian Coast Guard
Border Security Force
Oil and Natural Gas Commission
Indian Air Lines
Air Port Authority of India
Private Air Lines



INTERNATIONAL CUSTOMERS... Government of Mauritius
British aerospace U.K.
Dornier Germany
Dnuk airways Bhutan
Necon air-Nepal
....etc

[:=Read Full Message Here=:]

i need the ppt stealth technology in aircrafts ....etc

[:=Read Full Message Here=:]

ABSTRACT
The design, fabrication and testing of a novel neurochip structure for extracellular stimulation and recording of cultured neural networks are presented. The neurochip has 16 neuron wells, spaced 100 µm apart, in a 4 x 4 array, which are fabricated on a 9 mm by 3 mm silicon membrane, 20-µm-thick. The fabrication of the chips involves photolithography and micromachining on both sides of the membrane, which is located at the bottom of a 500-µm-deep cavity. Experimentally, the biocompatibility h ....etc

[:=Read Full Message Here=:]

Electrical systems in
Aircrafts and Ships ....etc

[:=Read Full Message Here=:]

Abstract
Mounting engines on the wing causes complex wing
flutter characteristics. The location of the engine mass
and the stiffness of the pylon relative to the wing are
important in preventing hazardous wing flutter. In
addition, if the nacelles are installed over the wing,
aerodynamic interference between the wing and the
nacelle may cause unfavorable flutter characteristics, in
particular, at transonic speeds. The flutter
characteristics of an over-the-wing engine mount
configuration obtained from theoretical analyses and
....etc

[:=Read Full Message Here=:]

1.AN INTRODUCTION TO AIRCRAFTS
1.1 Components of Aircraft:
Aircrafts come in many different shapes and sizes depending on the mission of the aircraft, but all modern airplanes have certain components in common. These are the fuselage, wing, tail assembly and control surfaces, landing gear, and power plant(s).
• The fuselage:
It is the body of the airplane that holds all the pieces of the aircraft together and many of the other large components are attached to it. The fuselage is generally streamlined as much as ....etc

[:=Read Full Message Here=:]

i need a ppt on nanomaterials applications in aircrafts ....etc

[:=Read Full Message Here=:]

A dense gas is defined as any gas whose density is greater than the density of the ambient air through which it is being dispersed. This result can be due to a gas with a molecular weight greater than that of air or a gas with a low temperature due to auto-refrigeration during release, or other processes. The importance of dense gas dispersion has been recognized for some time. Early field experiments (Van Ulden, 1974; Puttock et al., 1982; Koopman et al., 1984) have confirmed that the mechanisms of dense gas dispersion differ markedly from neu ....etc

[:=Read Full Message Here=:]