A PIPELINE FAST FOURIER TRANSFORM FOR DIGITAL SPECTRUM ANALYSIS

Abstract:- This paper describes a novel structure for a hardwired fast Fourier transform (FFT) signal processor that promises to permit digital spectrum analysis to achieve throughput rates consistent with extremely wide-band radars. The technique is based on the use of serial storage for data and intermediate results and multiple arithmetic units each of which carries out a sparse Fourier transform. Details of the system are described for data sample sizes that are binary multi ....etc

[:=Read Full Message Here=:]

sir i need PPt n report reagarding single point n overlap FFT. if u can helpme it will be great of u. ....etc

[:=Read Full Message Here=:]

Abstract
I have implemented the Fast Fourier Transform (FFT) algorithm, using the method of Cooley-Tukey. The FFT reduces the computation required in determining the Fourier Transform, which is used in several applications in science and engineering, including signal processing computations and spectral analysis. The Cooley-Tukey method primarily uses binary logic, making use of the symmetry and periodicity properties of complex exponentials. Substantial savings can be made in computation, especially when the number of input sample values is ....etc

[:=Read Full Message Here=:]

pls send details ....etc

[:=Read Full Message Here=:]

A 64 Point Fourier Transform Chip

Fourth generation wireless and mobile system are currently the focus of research and development. Broadband wireless system based on orthogonal frequency division multiplexing will allow packet based high data rate communication suitable for video transmission and mobile internet application. Considering this fact we proposed a data path architecture using dedicated hardwire for the baseband processor. The most computationally intensive part of such a high data rate system are the 64-point inverse FFT in the ....etc

[:=Read Full Message Here=:]

Fourth generation wireless and mobile system are currently the focus of research and development. Broadband wireless system based on orthogonal frequency division multiplexing will allow packet based high data rate communication suitable for video transmission and mobile internet application. Considering this fact we proposed a data path architecture using dedicated hardwire for the baseband processor. The most computationally intensive part of such a high data rate system are the 64-point inverse FFT in the transmit direction and the viterbi d ....etc

[:=Read Full Message Here=:]

Introduction
The DSP world today is ruled by different transforms. Discrete Fourier transforms are most used. So is the fast Fourier transform, which is the faster version of DFT. Suppose we take FFT of a signal. On taking the inverse fast Fourier transform, we except the output to be the same as the input. This is called the invertibility property. But on most occasions, disappointment is the result. This is due to the finite word length of the registers used to store the samples and the coefficients. This seminar introduces a method called i ....etc

[:=Read Full Message Here=:]

Fast Fourier Transform (FFT)




Operation Count

How do we evaluate computational complexity?
count the number of real multiplications and
additions
by ¨real¨ we mean either fixed-point or floating point
operations depending on the specific hardware
subtraction is considered equivalent to additions
divisions are counted separately
Other operations such as loading from memory, storing in
memory, loop counting, indexing, etc are not ....etc

[:=Read Full Message Here=:]

#define PTS 256 //# of points for FFT
typedef struct {float real,imag;} COMPLEX;
extern COMPLEX w; //twiddle constants stored in w

void FFT(COMPLEX *Y, int N) //input sample array, # of points
{
COMPLEX temp1,temp2; //temporary storage variables
int i,j,k; //loop counter variables
int upper_leg, lower_leg; //index of upper/lower butterfly leg
int leg_diff; //difference between upper/lower leg
int num_s ....etc

[:=Read Full Message Here=:]

PREFACE

The DSP world today is ruled by different transforms. Discrete Fourier transforms are most used. So is the fast Fourier transform, which is the faster version of DFT.
Suppose we take FFT of a signal. On taking the inverse fast Fourier transform,we except the output to be the same as the input.This is called the invertibility property.But on most occasions, dissapointment is the result. This is due to the finite word length of the registers used to store the samples and the coefficients.
This seminar introduces a method called integ ....etc

[:=Read Full Message Here=:]