FERRO ELECTRIC RAM
INTRODUCTION
RAM IS A TYPE OF NON-VOLATILE READ/WRITE RANDOM ACCES SEMICONDUCTOR MEMORY.
FRAM COMBINES THE ADVANTAGES OF SRAM, EPROM AND DYNAMIC RAM.
IT IS FAST MEMORY WITH A VERY LOW POWER REQUIREMENT.
FRAM IS FOUND MAINLY IN SMALL CONSUMER DEVICES.
FRAM IS FASTER THAN FLASH MEMORY.
COMPONENTS OF FERRO ELECTRIC RAM
A FERROELECTRIC RAM CONSISTS OF A FERROELECTRIC CAPACITOR AND A MOS TRANSISTOR.
THE FRAM DIFFERS FROM DRAM IS ITS DIELECTRIC PROPER ....etc

[:=Read Full Message Here=:]

Investment Casting a Turbine Rotor

presented by:
Tejas Jadhav

Guided by-
Prof. P.G.Kulkarni

abstract:-

Investment casting is an industrial process based on lost-wax casting. Investment casting is an advanced metal forming process used to produce metal parts in high quality, functionality and cost-effectiveness. Lost wax casting process is a one-to-one process in which one disposable pattern produces one metal part. When combined with ....etc

[:=Read Full Message Here=:]

Introduction

Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin.
Plastic tooling offers several advantages over conventional metal tooling. These includes:


1. Lowest cost
2. Less time.
3. Light weig ....etc

[:=Read Full Message Here=:]

Application Of Ferro-cement In Contruction

INTRODUCTION
Ferro-cemnt is a relatively new material consist of wire meshes and cement mortar.
Developed by P.L.Nervi,an Italian architect in 1940.
Widely used due to the low self weight,lack of skilled workers,no need of framework etc¦.
Quality of ferrocement works are assured because the components are manufactured on machinery set up and execution time at work site is less.
Maintenance cost is low.
Ferro-cement construction has come into widespread use only ....etc

[:=Read Full Message Here=:]

SEMINAR REPORT ON SINGLE CRYSTAL CASTING OF HPTR BLADE FOR AL-31FP ENGINE

Presented by,
Dillip Kumar Das Mohapatra
Mechanical Engg.
Regd No.-0721101016
7th Semester
VSSUT,BURLA





SINGLE CRYSTAL HP TURBINE BLADE

HPTR blades are hollow and of single crystal structure. This enhance creep resistance, thermal fatigue and hence enhances the life of the blade.
the shape of the turbine blade has a larger relative thickness and curvature compare to compressor blade




Turbine blade ....etc

[:=Read Full Message Here=:]

Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin. Plastic tooling offers several advantages over conventional metal tooling. These includes:

1. Lowest cost

2. Less time.

3. Light weight, easily handled ....etc

[:=Read Full Message Here=:]

sir i m PG student i am intreseted in ferrocement technology .so please help me. ....etc

[:=Read Full Message Here=:]

Moulds in Casting of Plastics and Thermoforming


Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin.
Plastic tooling offers several advantages over conventional metal tooling. These includes:


1. Lowest ....etc

[:=Read Full Message Here=:]

upstair construction ferocement in 820sqft ....etc

[:=Read Full Message Here=:]

Most metal parts are manufactured by either fully-liquid (e.g., casting) or fully-solid (e.g., forging) processes. Semi-Solid Metalworking (SSM) incorporates elements of both casting and forging for the manufacture of near-net-shape discrete parts. Applications are fuel rails, suspension arms, engine brackets, steering Knuckles,rear axle components and motor cycle upper fork plates.



SSM casting was selected for each of these applications for different reasons - high integrity, pressure tightness and design simplification. In eac ....etc

[:=Read Full Message Here=:]