SPEED CONTROL OF SYNCHRONOUS MOTOR BY USING VARIABLE FREQUENCY DRIVES



ABSTRACT :

A novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency is presented. The control scheme is based on the popular constant volts per hertz (V/f) method using low-cost open-loop current sensors. Only stator current measurements are needed to compensate for both stator resistance d ....etc

[:=Read Full Message Here=:]

(1)Power modulator:
Resistance controllers
Eddy current drive
MG set
The function of the power modulator is to change the electric energy of the source as per load torque speed characteristics.
(2)Control circuit:
The function of control circuit is to control - the speed, starting characteristics and braking characteristics
(3)Motor:
The motor can be ac or dc, as per the application of use of the drive.
(4)Sensing unit:
....etc

[:=Read Full Message Here=:]

Simona Coman1, V. Comnac1, Member IEEE, Cr. Boldisor1, D.C. Dumitrache2
1Automation Department, “Transilvania” University of Brasov, 5 M.Viteazu Str.,
500174 Brasov, Romania, phone/fax: +40 0268 418836,
2 Department of Automatic Control, Technical University of Cluj-Napoca,
26-28 Gh. Baritiu Str., 400027 Cluj-Napoca, Romania



Abstract –

The distributed control systems with communication
networks are used in many industrial applications. These systems
are often re ....etc

[:=Read Full Message Here=:]

CHAIN DRIVES IN LOW TORQUE DRIVES AND REDUCING PULSATIONS
INTRODUCTION TO DRIVES

Mechanical components used for power transmission.It may be belt, chain or gear depending on engine design parameters like - Distance between crankshaft and camshaft, engine maximum speed, engine-torque and engine construction cost.- Power transmission is done from one shaft to another shaft which may or may not rotate at same spe ....etc

[:=Read Full Message Here=:]

Electrical Drives of Machine Tools
Introduction
The arrangement of the motor nearby the operative member and also the use of variable-speed electric motors make it possible to simplify mechanical transmissions as well as the construction of the machine.
This helps to improve machine-tool design and considerably reduce the physical force required to handle the machine.
Introduction
One or more electric motors driving the operative members of the machine tool make up the machine's essential components.
T ....etc

[:=Read Full Message Here=:]

i wANT DOWNLOad this book Power Converters And AC Electrical Drives plz help me i neet it ....etc

[:=Read Full Message Here=:]

ADAPTIVE CONTROLLER FOR DC MOTOR DRIVES: A HARDWARE AND SOFTWARE APPROACH

F I Ahmed, A M El-Tobshy, A A Mahfouz, and M M Ibrahim
Faculty of Engineering, University of Cairo, Egypt



Abstract:

The most commonly used controller for the speed control of dc motor drives is (P-I) controller. In spite of the major features of the (P-I) controller, it has some disadvantages such as: the high starting overshoot in speed, the sensitivity to controller gains and the sluggish response due to sudden change ....etc

[:=Read Full Message Here=:]

SPEED CONTROL OF SYNCHRONOUS MOTOR BY USING VARIABLE FREQUENCY DRIVES



ABSTRACT :

A novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency is presented. The control scheme is based on the popular constant volts per hertz (V/f) method using low-cost open-loop current sensors. Only stator current measurements are needed to compensate for both stator resista ....etc

[:=Read Full Message Here=:]

difference between chopper fed drives and converter fed drives pdf ....etc

[:=Read Full Message Here=:]

I need some ppts regarding special electrical drives like about SRM, BLDC, Stepper motors, Synchronous reluctance motors.. Pls i need it quickly ....etc

[:=Read Full Message Here=:]