INTRODUCTION
The abbreviation CFD stands for computational fluid dynamics. It represents a vast area of numerical analysis in the field of fluidâ„¢s flow phenomena. Headway in the field of CFD simulations is strongly dependent on the development of computer-related technologies and on the advancement of our understanding and solving ordinary and partial differential equations (ODE and PDE). However CFD is much more than just computer and numerical science. Since direct numerical solving of complex flows in real-like conditions requires ....etc

[:=Read Full Message Here=:]

CFD SIMULATION OF ORIFICE PULSE TUBE REFRIGERATOR

Banjare Y. P. *, Sahoo R. K., Sarangi S. K.
Department of Mechanical Engineering, NIT Rourkela-769008, Orissa




Abstract A commercial Computational fluid dynamics (CFD) software package Fluent 6.1 is used to model the oscillating flow inside a pulse tube cryocooler. In this paper analysis of orifice type pulse tube refrigerator (OPTR) systems operating under a variety of thermal boundary conditions are modeled at different frequencies. The compressor us ....etc

[:=Read Full Message Here=:]

Relative roles of CFD and wind tunnel testing in the development of aircraft

Introduction
CFD
CFD is computational technology that enables us to study the dynamics of things that flow.
Using CFD, a computational model that represents a system or device that we want to study is built. Then we apply the fluid flow physics to this virtual prototype, and the software outputs a prediction of the fluid dynamics.

Application
fluid flow, heat transfer , mass , phase change , chemical re ....etc

[:=Read Full Message Here=:]

APPLICATION OF CFD IN MECHANICALENGINEERING
PRESENTED BY

Binu k s
99218
S8 mechanical



DEPARTMENT OF MECHANICAL ENGINEERING

GOVERNMENT ENGINEERING COLLEGE


THRISSUR



....etc

[:=Read Full Message Here=:]

By
Sunil Kumar Rath (10503069
National Institute of Technology Rourkela


Abstract
The multigrid algorithm is an extremely efficient method of approximating the solution to a given problem. The functions involved in the calculations are all discrete, or discontinuous, and are represented by an array of values taken from equally-spaced points along their range - a grid. The algorithm's efficiency lies in the fact that once an approximate solution to the problem is found its ....etc

[:=Read Full Message Here=:]

ABSTRACT
The overall goal of the work presented in this thesis is to extend the physical understanding of the external aerodynamics associated with the rotating case of Hovering Rotor using Computational Fluid Dynamics (CFD) technique.
Rotating blades encounter tip vortices coming from preceding blades, which results in Blade Vortex Interaction(BVI) responsible for producing dynamic effects. Understanding the complex flow field due to this dynamic effects produced by wakes is therefore very important for the prediction of effects such as blad ....etc

[:=Read Full Message Here=:]

ABSTRACT
Since two-three decades, hydrogen has been identified as a versatile potential fuel competent to the conventional fuel such as gasoline. In order to implement it fully and to develop the combustion based power devices which may supply much higher energy density than others, the understanding of hydrogen air combustion mechanism is very essential. In this seminars, Computational Fluid Dynamics (CFD) based numerical simulations have been performed to study the combustion of non-premixed hydrogen- ....etc

[:=Read Full Message Here=:]

Computational Fluid Dynamics (CFD) is an extremely effective tool to solve problems involving mass and even heat transfer. Problems with varying degrees of complexities can now be easily solved with the help of appropriately written CFD codes. A CFD analysis is performed to:1)understand the nature of fluid flow around differsnt geometries like an aerofoil or any other shape for that matter.2)find the lift and drag effects for an aerodynamic structure.3)analyse the heat transfer by fluids in devices ranging from radiators to furnaces to gas turb ....etc

[:=Read Full Message Here=:]

Computational Fluid Dynamics (CFD) is an extremely effective tool to solve problems involving mass and even heat transfer. Problems with varying degrees of complexities can now be easily solved with the help of appropriately written CFD codes. A CFD analysis is performed to:1)understand the nature of fluid flow around differsnt geometries like an aerofoil or any other shape for that matter.2)find the lift and drag effects for an aerodynamic structure.3)analyse the heat transfer by fluids in devices ranging from radiators to furnaces to gas turb ....etc

[:=Read Full Message Here=:]

presented by:
Mudit Rajput



Abstract
CFD Modelling of Hot-Machining Operation is a machining method conducted on conventional machine tools in which work piece is preheated before cutting operation to become softer and thereby to reduce its shear strength. Here in Final Year B.Tech Project work this work is assigned to me for understanding the Hot-Machining prospects. In our Work the job to be machined is of High Manganese- Steel. As we know the machining of these materials has always been a great challenge. ....etc

[:=Read Full Message Here=:]