i need more details about the circuit and working of vehicle mileage tester ....etc

[:=Read Full Message Here=:]

A large interest in renewable energy systems has been developed to mitigate the green house effect. In Western Europe, the focus is thus, on wind power and especially on offshore locations, due to higher energy production, a longer expected life time and lack of suitable wind turbine sites on land. A DC cable is the preferred choice when connecting large offshore wind farms to the grid. The utilization of the Dc cables was enabled by the new HVDC transmission technology using voltage sourced converters. The offshore windfarms that are being bui ....etc

[:=Read Full Message Here=:]

I need everything that discusses lan cable tester for my seminar topic ....etc

[:=Read Full Message Here=:]

Battery Tester Project Using LM3914 IC
This objective of this project is to design and build a battery tester that is able to test various types of dry cell and rechargable battery with a voltage of less than 2V. Configured as a bar graph battery level indicator, the LM3914 IC from National Semiconductor senses the voltage levels of the battery under test and drives the 10 LEDs to ON or OFF based on the voltage that is detected. The current driving the LEDs is regulated by using the external resistor R1 and hence limiting resistors are not req ....etc

[:=Read Full Message Here=:]

A large interest in renewable energy systems has been developed to mitigate the green house effect. In Western Europe, the focus is thus, on wind power and especially on offshore locations, due to higher energy production, a longer expected life time and lack of suitable wind turbine sites on land. A DC cable is the preferred choice when connecting large offshore wind farms to the grid. The utilization of the Dc cables was enabled by the new HVDC transmission technology using voltage sourced converters. The offshore windfarms that are being bui ....etc

[:=Read Full Message Here=:]

ZENER DIODE TESTER

ABSTRACT


The testing of zener diodes requires a variable dc power supply. A typical test circuit can be constructed, as shown in figure 4-19. In this circuit, the variable power supply is used to adjust the input voltage to a suitable value for the zener diode being tested. With the zener diode connected no current will flow until the voltage across the diode is equal to the zener ....etc

[:=Read Full Message Here=:]

Simple Component and Continuity Tester
This simple project may be used for testing components, as well as checking circuit board tracks, wires and connections for continuity. a small current is passed through the item being tested
and the LED will light brightly, dimly or not at all according to the resistance of the item.

indication:LED bright means the resistance is low, less than about 1kW
-LED dim:-resistance is medium, a few kW
-LED off:-resistance is high above 10k

Parts Required:
resistor: 390W,red LED 5mm diameter, cr ....etc

[:=Read Full Message Here=:]

send me details of Microcontroller based IC Tester (Digital) serially interfaced with PC ....etc

[:=Read Full Message Here=:]

Abstract

A method and apparatus for verifying an integrated circuit device test for testing an integrated circuit device on an automated tester is presented. An integrated circuit device simulator simulates a flawed integrated circuit device that models one or more known flaws, or physical defects, in an assumed good integrated circuit device design. A tester simulator simulates the integrated circuit device test which sends stimuli to, and receives responses from, the simulated flawed integrated circuit device.

A test analyzer then dete ....etc

[:=Read Full Message Here=:]

man]
I WANT THE SUBJECT DETAILSFYHJUFYJHMYYGTUJTGJUJYJYGJGJGJGJGHDRSTRSTRSTTGYT ....etc

[:=Read Full Message Here=:]