An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber Reinforced Plastics .

ABSTRACT:

With the current background of increasing oil price, a number of researches on development and supply ofrenewable energy are on process. Wind energy is one of them. Not only as energy itself, but also as travel resources, windenergy is ideal substitute for Korea equipped with appropriate conditions.
The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S (Wind Turbine System) an ....etc

[:=Read Full Message Here=:]

presented by:
P Mahendranath

Abstract
Helicopter performance depends on the design of the rotor blades such as length of the blade, selection of airfoils and blade material. For heavy lifting, a large rotor works best, but short blades reduce drag and ultimately allow for higher maximum speeds. There is an approach to implement both configurations in one design where the design en-counter huge centrifugal forces, requiring large actuators to pull the rotors in. so for high lifting performance helicopter requires large rotor blad ....etc

[:=Read Full Message Here=:]

Plz provide me seminaar topic on blade server
thank you ....etc

[:=Read Full Message Here=:]

This article is presented by:
A.K.Matta1a
L.Narayana
DESIGN, ANALYSIS AND LIFE ESTIMATION OF A FIRST STAGE ROTOR BLADE USING NICKEL BASED SUPER ALLOY(CMSX4)

ABSTRACT-In a combined cycle gas turbine (CCGT) plant, high-temperature heat is input to the power plant, usually from burning of fuel,which is converted to electricity as one of the outputs.In continuous operation turbine blades are prone to high cycle fatigue failures.These fa ....etc

[:=Read Full Message Here=:]

P V Ramaiah J. and G Krishnaiah2
I Department of Mechanical Engineering, Srikalahasteeswara Institute of Technology, Andhra Pradesh, India 2Department of Mechanical Engineering, SV University College of Engineering, Andhra Pradesh, India
The manuscript was received on 15 June 2006 and was accepted after revision for publication on 30 May 2007. DOl: 1O.1243/09544062JMES411


abstract

The paper deals with modelling and design of a friction damper. This has been done in four phases. In the first p ....etc

[:=Read Full Message Here=:]

please send me ppt on blade server....including full report please,its urgent ....etc

[:=Read Full Message Here=:]

i wnt dis topic because i wanna do project work on this topic ....etc

[:=Read Full Message Here=:]

Definition
Blade servers are self-contained computer servers, designed for high density. Slim, hot swappable blade servers fit in a single chassis like books in a bookshelf - and each is an independent server, with its own processors, memory, storage, network controllers, operating system and applications. The blade server simply slides into a bay in the chassis and plugs into a mid- or backplane, sharing power, fans, floppy drives, switches, and ports with other blade servers.

Blade servers are self-contained computer servers, designed fo ....etc

[:=Read Full Message Here=:]

request a report on 'blade server' ....etc

[:=Read Full Message Here=:]

SEMINAR REPORT ON SINGLE CRYSTAL CASTING OF HPTR BLADE FOR AL-31FP ENGINE

Presented by,
Dillip Kumar Das Mohapatra
Mechanical Engg.
Regd No.-0721101016
7th Semester
VSSUT,BURLA





SINGLE CRYSTAL HP TURBINE BLADE

HPTR blades are hollow and of single crystal structure. This enhance creep resistance, thermal fatigue and hence enhances the life of the blade.
the shape of the turbine blade has a larger relative thickness and curvature compare to compressor blade




Turbine blade ....etc

[:=Read Full Message Here=:]