Introduction

In general the forklift can be defined as a tool capable of lifting hundreds of kilograms. A forklift is a vehicle similar to a small truck that has two metal forks on the front used to lift cargo. The forklift operator drives the forklift forward until the forks push under the cargo, and can then lift the cargo several feet in the air by operating the forks. The forks, also known as blades or tines, are usually made out of steel and can lift up to a few tons.
Forklifts are either powered by gasoline, propane, o ....etc

[:=Read Full Message Here=:]

We want to prepare remote operated lift or elevator system. We need basic idea or full project report for this topic.

We need to use the remote system for operating the material handling lift or elevator in ongoing construction sites buildings.

Please upload if any one have.

Bhavin ....etc

[:=Read Full Message Here=:]

plz send me detail about hydraulic lift include principle,construction, working, application, part detail, type.etc ....etc

[:=Read Full Message Here=:]

i need asm code for interfacing gsm modem with AT89c51.... ....etc

[:=Read Full Message Here=:]

please send me the datas for voice operated elevator ....etc

[:=Read Full Message Here=:]

Sir,
I need AMR projects source code assambly.
Help me please.
akash ....etc

[:=Read Full Message Here=:]

Prepared by:
SHAMEER N

Under the guidance of
Dr. S ASHOK


Introduction

In the fast developing world, height of the buildings increased tremendously and the lift has become more of a necessary rather than luxury. When the number of floor increased the control mechanism required for the lift will become more complex. Programmable Logic Controllers are widely accepted industrial control device. With the growth in technology PLCs are now capable of advanced data manipulations, communications ....etc

[:=Read Full Message Here=:]

Sir, I am JAGADISH a final year Mechanical Engineering student want to present a seminar on Intelligent-Variable valve Timing and lift Electronic Control(i-VTECH) engine. so please help me by uploading the information and PPT for the same. ....etc

[:=Read Full Message Here=:]

VTEC (standing for Variable valve Timing and lift Electronic Control) is a system developed by Honda to improve the combustion efficiency of its internal combustion engines throughout the RPM range. This was the first system of its kind and eventually led to different types of variable valve timing and lift control systems that were later designed by other manufacturers (VVTL-i from Toyota, VarioCam Plus from Porsche, and so on). It was invented by Honda's chief engine designer Kenichi Nagahiro. ....etc

[:=Read Full Message Here=:]

i need assembly language programming code for automatic nightlamp with morning alarm ....etc

[:=Read Full Message Here=:]