Optimal Designs and Comparison of the Doubly
Salient Permanent Magnet Machine and
Flux-reversal Machine in Low-speed Applications

Abstract
The subject of this is to optimize the design and to compare
The performances of a low-speed doubly salient permanent magnet machine with
Those of a low-speed flux-reversal machine devoted to direct drive applications. The
Optimization, focused on the maximization of the machines mass-to-torque ratio,
is done by a genetic algorithm combined with the finite-element method (FEM) ....etc

[:=Read Full Message Here=:]

the design of a generic virtual instrument used for real-time experimentation purposes at Polytechnic Universityâ„¢s control engineering laboratory in a remote-access environment. These instruments can be freely downloaded and the remote user can access the laboratory facilities from anywhere and anytime. The philosophy behind our Internet-accessed remote laboratory is based on a client/server computer configuration. The server, situated near the experiment, transfers to it the received command signals transmitted by the client. The client ....etc

[:=Read Full Message Here=:]

I would lyk to do poster presentation on Innovative Designs in CIVIL Engg.
plz gve me sum ideas.. ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

abstract and seminor report on antenna effect in vlsi design and ppt ....etc

[:=Read Full Message Here=:]

Microstrip Antenna Designs for Sensor and Communications Applications


Outline

One of the main goals of the Center for Advanced Sensor and Communications Antennas at the University of Massachusetts is to identify and develop antenna technologies with improved performance and/or reduced cost for future applications.


Near field focused microstrip array
Ku band fan beam microstrip array
Improved bandwidth microstrip reflectarray


Near Field Focused Mic ....etc

[:=Read Full Message Here=:]

Request about antenna effect in vlsi design ,abstract and ppt ....etc

[:=Read Full Message Here=:]

Research Designs




Types of Research Designs


Exploratory Research (huh?)
Designed to generate basic knowledge, clarify relevant issues uncover variables associated with a problem, uncover information needs, and/or define alternatives for addressing research objectives.
A very flexible, open-ended process.
Descriptive Research (who, what, where, how)
Designed to provide further insight into the research problem by describing the variables of interest.
....etc

[:=Read Full Message Here=:]

Innovative Designs for Magneto-Rheological Dampers



Introduction
The main purpose of this chapter is to introduce the topic of magneto-rheological
(MR) dampers to the reader. Also presented is an explanation of the mechanism
through which MR fluid works. Lastly, the project objectives and the approach
taken to evaluate different MR damper designs are discussed.

1.1 An Overview of Magneto-Rheological Dampers
In recent years, manufacturers have s ....etc

[:=Read Full Message Here=:]

A candidate-set-free algorithm for generating D-optimal split-plot designs


Introduction
Split-plot designs arise in experimental studies when a completely randomized run order
is structurally impossible, expensive or inconvenient. So, a statistician’s recommendation
to randomize the order of the runs is often ignored in practice. Instead the experimenter
rearranges the runs of the design so that hard-to-change factors only need to be changed a
few times ....etc

[:=Read Full Message Here=:]