05-05-2017, 08:32 AM
05-05-2017, 09:42 AM
It consists mainly of a robot, multi-channel RF transmitter, RF receiver, drilling unit and control unit.
The remote handset consists of four buttons. When the user presses a specific button on the hand set, the transmitter sends the corresponding RF signal and the RF receiver receives the signal and sends it to the control section.
The control section controls the exciter section for the corresponding operation of the motor and thus the robot works accordingly.
The drill section can be moved vertically up and down. Depending on the place to be drilled, the section can be adjusted. A mandrel is connected to this drill section. The bit can be mounted with the mandrel.
Through the remote control, the robot can move as the user's desire to drill into the specific area.
This type of robot can be used to drill areas where humans can not enter.
The remote control contains four buttons. When the user presses a specific button on the remote handset, the RF transmitter will send the corresponding RF signal to the RF receiver. The RF receiver will receive the signal and send the signal to the control section. The control section will control the drive section for proper operation of the motor. Therefore, the robot works accordingly.
The user can move the drill section vertically up and down. Based on the location to be drilled, the driving section can be adjusted. A mandrel is connected to this drill section. The drill bit can be connected to the chuck. Using the remote control, the user can move the robot to any place in the specific area. We can use this robot to drill areas where humans can not enter. It's easy to use.
The remote handset consists of four buttons. When the user presses a specific button on the hand set, the transmitter sends the corresponding RF signal and the RF receiver receives the signal and sends it to the control section.
The control section controls the exciter section for the corresponding operation of the motor and thus the robot works accordingly.
The drill section can be moved vertically up and down. Depending on the place to be drilled, the section can be adjusted. A mandrel is connected to this drill section. The bit can be mounted with the mandrel.
Through the remote control, the robot can move as the user's desire to drill into the specific area.
This type of robot can be used to drill areas where humans can not enter.
The remote control contains four buttons. When the user presses a specific button on the remote handset, the RF transmitter will send the corresponding RF signal to the RF receiver. The RF receiver will receive the signal and send the signal to the control section. The control section will control the drive section for proper operation of the motor. Therefore, the robot works accordingly.
The user can move the drill section vertically up and down. Based on the location to be drilled, the driving section can be adjusted. A mandrel is connected to this drill section. The drill bit can be connected to the chuck. Using the remote control, the user can move the robot to any place in the specific area. We can use this robot to drill areas where humans can not enter. It's easy to use.