28-01-2011, 09:49 PM
Guest
05-08-2015, 07:24 AM
please send me the input and output values for the gass sensor and microcontroller and how to displayed those values in 16x2 LCD to
---> lkg449[at]gmail.com
---> lkg449[at]gmail.com
05-08-2015, 09:44 AM
help to interface gas sensor with microcontroller
Ideal gas sensor is used to detect the presence of a dangerous LPG leak in your car or in a service station, storage tank environment. This unit can be easily incorporated into an alarm unit, to sound an alarm or give a visual indication of the LPG concentration. The sensor has excellent sensitivity combined with a quick response time. The sensor can also sense iso-butane, propane, LNG and cigarette smoke.
If the LPG sensor senses any gas leakage from storage the output of this sensor goes low. This low signal is monitored by the microcontroller and it will identify the gas leakage. Now the microcontroller is turn on LED and Buzzer. After few milliseconds delay, it also turn on exhaust fan for throwing gas out and continue send messages as ‘GAS LEAKAGE’ to a mobile no, written in c-code.
GAS LEAKAGE DETECTION & AUTO ON-OFF GAS SYSTEM
This system helps you to upgrade your safety standards, comply statutory requirements on environmental commitments and most important and basic function
being prevent accidents and protect life and property from disaster. In the past, it has been a conventional practice to employ combustion apparatus such as a furnace, heater, stove or LPG kit in cars, which utilizes a combustible vapor or gas to produce heat energy when properly ignited. In the use of combustible apparatus in which a combustible gas such as natural or liquid propane gas is burned in heating boilers, domestic water heaters, ovens, stoves and the like, the apparatus or appliance is generally of an automatic recycling type. That is to say, the equipment is generally in operation for short periods of time after which is shut down for a short period of time. The equipment has intermediate operation and the appliance is generally started and stopped at the signal of an automatic controller, such as a thermostat, which may be actuated by temperature, pressure, or the like. The LPG Kit installed is many times installed inside the car creating possibilities of large accidents. This type of appliance/Kits is normally unattended by any operating personnel, since it is automatic in operation and, therefore, one hazard encountered in the use of such an appliance is the possibility that during a standby period or a period in which it is not in operation, a gas leak may occur thereby resulting in a large accumulation of combustible gas which can produce an explosion if the detection is not quickly noticed. Although some sophisticated detector means have been provided, it is contemplated that the indicator means should be simple and economical so that the entire system may be readily incorporated into mobile trailers, campers, boats and other vehicles or living quarters having appliances dependent upon storage of pressurized gas.
Ideal gas sensor is used to detect the presence of a dangerous LPG leak in your car or in a service station, storage tank environment. This unit can be easily incorporated into an alarm unit, to sound an alarm or give a visual indication of the LPG concentration. The sensor has excellent sensitivity combined with a quick response time. The sensor can also sense iso-butane, propane, LNG and cigarette smoke.
If the LPG sensor senses any gas leakage from storage the output of this sensor goes low. This low signal is monitored by the microcontroller and it will identify the gas leakage. Now the microcontroller is turn on LED and Buzzer. After few milliseconds delay, it also turn on exhaust fan for throwing gas out and continue send messages as ‘GAS LEAKAGE’ to a mobile no, written in c-code.
GAS LEAKAGE DETECTION & AUTO ON-OFF GAS SYSTEM
This system helps you to upgrade your safety standards, comply statutory requirements on environmental commitments and most important and basic function
being prevent accidents and protect life and property from disaster. In the past, it has been a conventional practice to employ combustion apparatus such as a furnace, heater, stove or LPG kit in cars, which utilizes a combustible vapor or gas to produce heat energy when properly ignited. In the use of combustible apparatus in which a combustible gas such as natural or liquid propane gas is burned in heating boilers, domestic water heaters, ovens, stoves and the like, the apparatus or appliance is generally of an automatic recycling type. That is to say, the equipment is generally in operation for short periods of time after which is shut down for a short period of time. The equipment has intermediate operation and the appliance is generally started and stopped at the signal of an automatic controller, such as a thermostat, which may be actuated by temperature, pressure, or the like. The LPG Kit installed is many times installed inside the car creating possibilities of large accidents. This type of appliance/Kits is normally unattended by any operating personnel, since it is automatic in operation and, therefore, one hazard encountered in the use of such an appliance is the possibility that during a standby period or a period in which it is not in operation, a gas leak may occur thereby resulting in a large accumulation of combustible gas which can produce an explosion if the detection is not quickly noticed. Although some sophisticated detector means have been provided, it is contemplated that the indicator means should be simple and economical so that the entire system may be readily incorporated into mobile trailers, campers, boats and other vehicles or living quarters having appliances dependent upon storage of pressurized gas.
Guest
24-12-2015, 12:26 AM
I want to interface IR and gas sensor with 8051 plz help me