18-04-2010, 12:12 PM
23-04-2010, 03:26 PM
Routing information protocol
It is a dynamic routing protocol used in local and wide area networks.
A router in the network needs to be able to look at a packetâ„¢s destination address and then
determine which of the output ports is the best choice to get the packet to that address.it
is classified as an interior gateway protocol (IGP) and uses the distance vector algorithm.
RIP has also been adapted for use in IPv6 networks in the RIPng form.
Technical details
distance-vector routing protocol, which employs the hop count as a routing metric. routing
loops is prevented heer by implementing a limit on the number of hops allowed in a path. The
hold down time is 180 seconds. RIP router transmitted full updates every 30 seconds. Thus
there could be a massive traffic burst every 30 seconds,as the networks grew in size and
number. deliberate variation into the update timer intervals is introduced for each router.
RIP version 1:
It uses classful routing. The periodic routing updates do not carry subnet information. all
subnets in a network class must have the same size.
RIP version 2:
RIP version 2 (RIPv2) was developed in 1993 due to the deficiencies in RIP version 1. It
could carry subnet information, thus supporting Classless Inter-Domain Routing (CIDR).hop
count limit of 15 was maintained as such. RIPv2 multicasts the entire routing table to all
adjacent routers
RIPng(RIP next generation):
It has Support of IPv6 networking.RIPng does not allow the attaching arbitrary tags to
routes. It equires specific encoding of the next hop for a set of route entries.
for more details refer this pdf:
[attachment=3362]
[attachment=3363]
http://en.wikipediawiki/Routing_information_protocol
It is a dynamic routing protocol used in local and wide area networks.
A router in the network needs to be able to look at a packetâ„¢s destination address and then
determine which of the output ports is the best choice to get the packet to that address.it
is classified as an interior gateway protocol (IGP) and uses the distance vector algorithm.
RIP has also been adapted for use in IPv6 networks in the RIPng form.
Technical details
distance-vector routing protocol, which employs the hop count as a routing metric. routing
loops is prevented heer by implementing a limit on the number of hops allowed in a path. The
hold down time is 180 seconds. RIP router transmitted full updates every 30 seconds. Thus
there could be a massive traffic burst every 30 seconds,as the networks grew in size and
number. deliberate variation into the update timer intervals is introduced for each router.
RIP version 1:
It uses classful routing. The periodic routing updates do not carry subnet information. all
subnets in a network class must have the same size.
RIP version 2:
RIP version 2 (RIPv2) was developed in 1993 due to the deficiencies in RIP version 1. It
could carry subnet information, thus supporting Classless Inter-Domain Routing (CIDR).hop
count limit of 15 was maintained as such. RIPv2 multicasts the entire routing table to all
adjacent routers
RIPng(RIP next generation):
It has Support of IPv6 networking.RIPng does not allow the attaching arbitrary tags to
routes. It equires specific encoding of the next hop for a set of route entries.
for more details refer this pdf:
[attachment=3362]
[attachment=3363]
http://en.wikipediawiki/Routing_information_protocol
24-08-2011, 12:00 PM
[attachment=15429]
INTERNET WORKING DEVICES SWITCH
In a telecommunications network, a switch is a device that channels incoming data from any of multiple input ports to the specific output port that will take the data toward its intended destination.
In the field of telecommunications, a telephone exchange or telephone switch is a system of electronic components that connects telephone calls. A central office is the physical building used to house inside plant equipment including telephone switches, which make telephone calls "work" in the sense of making connections and relaying the speech information.
Basically switches are three types –
1-Manual Switches
2-Eletcromechanically switches
3-Electronics Switches
4-Digital Switches
MANUAL SWITCHES
With manual service, the customer lifts the receiver off-hook and asks the operator to connect the call to a requested number. Provided that the number is in the same central office, the operator connects the call by plugging into the jack on the switchboard corresponding to the called customer's line. If the call is to another central office, the operator plugs into the trunk for the other office and asks the operator answering (knownas the "inward" operator) to connect the call.
Figure 1
Electromechanically Switches ( Automatic switching)
The Invention of Automatic Switchin
Almon B. Strowger was an undertaker in Kansas City, USA. The story goes that there was a competing undertaker locally whose wife was an operator at the local (manual) telephone exchange. Whenever a caller asked to be put through to Strowger, calls were deliberately put through to his competitor. This obviously frustrated Strowger greatly and he set about devising a system for doing away with the human part of the equation Strowger developed a system of automatic switching using an electromechanical switch based around around electromagnets and pawls. With the help of his nephew (Walter S. Strowger) he produced a working model in 1888 (US Patent No. 447918 10/6/1891). In this selector, a moving wiper (with contacts on the end) moved up to and around a bank of many other contacts, making a connection with any one of them.
Strowger did not invent the idea of automatic switching; it was first invented in 1879 by Connolly & McTigthe but Strowger was the first to put it to effective use. Together with Joseph B. Harris and Moses A. Meyer, Strowger formed his company 'Strowger Automatic Telephone Exchange' in October 1891.
In the late 1890's Almon B. Strowger retired and eventually died in 1902. In 1901, Joseph Harris licensed the Strowger selectors to the Automatic Electric Co. (AE); the two companies merged in 1908. The company still exists today as AG Communications Systems, having undergone various corporate changes and buyouts along the way.
Selector Theory
A selector starts in the 'home' position and with each 'impulse' the wiper contacts would progress round the output bank to the next position. Each output would be connected to a different subscriber, thus the caller could connect to any other subscriber who was connected to that bank, without any manual assistance from an operator.
INTERNET WORKING DEVICES SWITCH
In a telecommunications network, a switch is a device that channels incoming data from any of multiple input ports to the specific output port that will take the data toward its intended destination.
In the field of telecommunications, a telephone exchange or telephone switch is a system of electronic components that connects telephone calls. A central office is the physical building used to house inside plant equipment including telephone switches, which make telephone calls "work" in the sense of making connections and relaying the speech information.
Basically switches are three types –
1-Manual Switches
2-Eletcromechanically switches
3-Electronics Switches
4-Digital Switches
MANUAL SWITCHES
With manual service, the customer lifts the receiver off-hook and asks the operator to connect the call to a requested number. Provided that the number is in the same central office, the operator connects the call by plugging into the jack on the switchboard corresponding to the called customer's line. If the call is to another central office, the operator plugs into the trunk for the other office and asks the operator answering (knownas the "inward" operator) to connect the call.
Figure 1
Electromechanically Switches ( Automatic switching)
The Invention of Automatic Switchin
Almon B. Strowger was an undertaker in Kansas City, USA. The story goes that there was a competing undertaker locally whose wife was an operator at the local (manual) telephone exchange. Whenever a caller asked to be put through to Strowger, calls were deliberately put through to his competitor. This obviously frustrated Strowger greatly and he set about devising a system for doing away with the human part of the equation Strowger developed a system of automatic switching using an electromechanical switch based around around electromagnets and pawls. With the help of his nephew (Walter S. Strowger) he produced a working model in 1888 (US Patent No. 447918 10/6/1891). In this selector, a moving wiper (with contacts on the end) moved up to and around a bank of many other contacts, making a connection with any one of them.
Strowger did not invent the idea of automatic switching; it was first invented in 1879 by Connolly & McTigthe but Strowger was the first to put it to effective use. Together with Joseph B. Harris and Moses A. Meyer, Strowger formed his company 'Strowger Automatic Telephone Exchange' in October 1891.
In the late 1890's Almon B. Strowger retired and eventually died in 1902. In 1901, Joseph Harris licensed the Strowger selectors to the Automatic Electric Co. (AE); the two companies merged in 1908. The company still exists today as AG Communications Systems, having undergone various corporate changes and buyouts along the way.
Selector Theory
A selector starts in the 'home' position and with each 'impulse' the wiper contacts would progress round the output bank to the next position. Each output would be connected to a different subscriber, thus the caller could connect to any other subscriber who was connected to that bank, without any manual assistance from an operator.